Need help putting a kaw 750 in X2.

Patrick Gilligan · Joined: 18 Aug 2007 Posts: 2

I'm thinking about putting a kaw 750 in an x2. What motor plate should I
use What electronics should I use What exhaust should I use and so fourth.
Any help is greatly appreciated.

thanks in advance
Pat

Archived from group: rec>sport>jetski

SRKAESE · Joined: 18 Aug 2007 Posts: 1

I have been riding mine for a few months now and it is a blast. 650+750
plates are the same. For the electrics I followed some recommendations and
machined the 750 case to accept the 650 stator. This has two advantages.
First you get to use a lighter 650 fly wheel that bolts right on. And you
can keep the rest of the electrical system stock without cutting and
splicing a single wire. If you need the cases machined I may be able to help
but the rest is a simple bolt in and go. I am running the 650 exhaust from
the manifold out. The manifolds are also interchangeable.
Good luck, it is a fun boat!
Scott Kaese
Exactal Tool
So. Plainfield NJ
908-561-1177
"Patrick Gilligan" wrote in message$nG.55332@rwcrnsc51.ops.asp.att.net...
> I'm thinking about putting a kaw 750 in an x2. What motor plate should I
> use What electronics should I use What exhaust should I use and so fourth.
> Any help is greatly appreciated.
>
> thanks in advance
> Pat
>
>
>